Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 38

Front-Panel Description
Table 1-7 Meanings of Port Status LEDs for Different Modes on Catalyst 2912 LRE XL and 2924 LRE
XL Switches (continued)
Port Mode Port LED Color
SPEED Cisco IOS
Release
12.0(5.x)WC1/
1
WC2
Cyan (off)
Green
1. The LEDs on Catalyst 2900 LRE XL switches with Cisco IOS Release 12.0(5.x)WC1 or Cisco IOS Release 12.0(5.x)WC2
provide information about the connected Cisco 575 LRE CPE devices. These IOS releases do not support the Cisco 585 LRE
CPE devices.
2. The Catalyst 2900 LRE XL switches do not support Cisco IOS Release 12.0(5.x)WC3.
3. The LEDs on Catalyst 2900 LRE XL switches with Cisco IOS Release 12.0(5.x)WC4 or later do not provide information
about any connected LRE CPE devices. To verify the LRE CPE Ethernet link status from a switch with this release or higher,
use the Port Settings window or the show remote interfaces status user EXEC command.
Figure 1-9 Bandwidth Utilization
10BaseT/100BaseTx
SYSTEM RPS
MODE
6.25 –12.4%+
12.5 –24%+
25 – 49%+
50%+
Catalyst 2900 Series XL Hardware Installation Guide
1-18
Description
Cisco IOS Release 12.0(5.x)WC4
Cyan LRE port or remote CPE Ethernet port is operating at
(off) 10 Mbps.
LRE port or remote CPE Ethernet port is operating at
100 Mbps.
Figure 1-9 shows bandwidth utilization percentages displayed by the right-most
LEDs.
Chapter 1
2 3
SERIES
Product Overview
78-6461-04