Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 76

Connecting to DC Power
Figure 2-24 Inserting Wires into the Terminal Block Plug
Use a ratcheting torque screwdriver to torque the terminal block captive screw
Step 5
(above the installed wire lead) to 4.5 1bf-in. (72 ozf-in.). (See
Do not overtorque the terminal-block captive screws. The recommended
Caution
maximum torque is 4.5 lbf-in. (72 ozf-in.).
Catalyst 2900 Series XL Hardware Installation Guide
2-32
Chapter 2
Return
Feed A
Negative
Return
Feed B
Negative
Figure
Installation
2-25.)
78-6461-04