Mounting The Switch In A Rack - Cisco Catalyst 9500 Series Hardware Installation Manual

Mounting the Switch in a Rack

2
Mounting the Switch in a Rack
Procedure
Step 1
Use the Phillips machine screws to attach the brackets and the extension rail to the switch.
Figure 36: Attaching the Extension Rail on a Cisco Catalyst 9500 Series Switch
1
2
Figure 37: Attaching the Extension Rail on a Cisco Catalyst 9500 High Performance Series Switch
Method to attach the extension rail on Cisco Catalyst 9500X Series Switches and Cisco Catalyst 9500 Series
switches is similar. The only difference is that a C9500 switch uses 4 screws to attach the extension rail on
to one side of the switch, whereas a C9500X switch uses 6 screws.
Cisco Catalyst 9500 Series Switches Hardware Installation Guide
44
M4.0x6mm Phillips flat-head screws
Cisco Catalyst 9500 Series switch
Number-8 Phillips flat-head 0.312" long
screws
- -
3 19-inch mounting brackets
4 Extension rails and - - brackets
Installing a Switch