Table of Contents
Advertisement
Chapter 1
System Message Overview
Table 1-1
Facility Codes (continued)
Facility Code
PORT_SECURITY
QOSMGR
RMON
SPAN
SPANTREE
SPANTREE_FAST
SPANTREE_VLAN_SW
STORM_CONTROL
SUPERVISOR
SUPQ
SW_DAI
SW_VLAN
TCAMMGR
UDLD
VQPCLIENT
•
Table 1-2
Severity Level
0 – emergency
1 – alert
2 – critical
3 – error
4 – warning
5 – notification
6 – informational
7 – debugging
•
OL-9641-01
Description
Port security
QoS manager
Remote Network Monitoring (RMON)
Switched Port Analyzer
Spanning Tree
Spanning-tree fast convergence
Spanning-tree VLAN switch
Storm control
Supervisor ASIC
Supervisor queue
Dynamic ARP inspection (Cisco ME
3400 switches only)
VLAN manager
Ternary content addressable memory
manager
UniDirectional Link Detection
VLAN Query Protocol client
SEVERITY is a single-digit code from 0 to 7 that reflects the severity of the condition. The lower
the number, the more serious the situation.
Message Severity Levels
MNEMONIC is a code that uniquely identifies the message.
Location
"PORT_SECURITY Messages" section on
page 2-48
"QOSMGR Messages" section on page 2-49
"RMON Messages" section on page 2-58
"SPAN Messages" section on page 2-58
"SPANTREE Messages" section on page 2-59
"SPANTREE_FAST Messages" section on
page 2-66
"SPANTREE_VLAN_SW Messages" section on
page 2-66
"STORM_CONTROL Messages" section on
page 2-66
"SUPERVISOR Messages" section on page 2-67
"SUPQ Messages" section on page 2-67
"SW_DAI Messages" section on page 2-69
"SW_VLAN Messages" section on page 2-71
"TCAMMGR Messages" section on page 2-75
"UDLD Messages" section on page 2-77
"VQPCLIENT Messages" section on page 2-79
Table 1-2
lists the message severity levels.
Description
System is unusable.
Immediate action required.
Critical condition.
Error condition.
Warning condition.
Normal but significant condition.
Informational message only.
Message that appears during debugging only.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
How to Read System Messages
1-3
Advertisement
Table of Contents
