Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
VQPCLIENT Messages
This section contains VLAN Query Protocol (VQP) client messages.
Error Message VQPCLIENT-2-CHUNKFAIL: Could not allocate memory for VQP.
Error Message VQPCLIENT-2-DENY: Host [enet] denied on interface [chars].
Error Message VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.
Quitting.
Error Message VQPCLIENT-2-IPSOCK: Could not obtain IP socket.
OL-9641-01
This message means that an error occurred when the system tried to allocate memory
Explanation
for the VQP client.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Explanation
This message means that the VLAN Membership Policy Server (VMPS) has denied
access for the given host MAC address to an interface. [enet] is the host MAC address, and [chars]
is the interface name.
Recommended Action
No action is normally required. If you think that the host should have been
allowed access, verify the configuration on the VMPS.
Explanation
This message means that an error occurred during initialization of the VQP client
platform-specific code.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that an error occurred when the system attempted to open an IP
Explanation
socket to the VMPS.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
1-4.
1-4.
1-4.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
VQPCLIENT Messages
"Error
"Error
"Error
2-79
Advertisement
Table of Contents
