Table of Contents
Advertisement
System Message Overview
This guide describes the Cisco ME 3400 and 2400 Ethernet Access switches system messages. During
operation, the system software sends these messages to the console (and, optionally, to a logging server
on another system). Not all system messages indicate problems with your system. Some messages are
purely informational, whereas others can help diagnose problems with communications lines, internal
hardware, or the system software. This guide also includes error messages that appear when the system
fails.
For information about system messages that are not Cisco ME switch platform-specific, see the Cisco
Note
IOS Software System Messages for Cisco IOS Release 12.2S.
This chapter contains these sections:
•
•
How to Read System Messages
System log messages can contain up to 80 characters and a percent sign (%), which follows the optional
sequence number or time stamp information, if configured. Messages are displayed in this format:
seq no:timestamp: %facility-severity-MNEMONIC:description
By default, a switch sends the output from system messages to a logging process.
Each system message begins with a percent sign (%) and is structured as follows:
%FACILITY-SEVERITY-MNEMONIC: Message-text
•
OL-9641-01
How to Read System Messages, page 1-1
Error Message Traceback Reports, page 1-4
FACILITY is a code consisting of two or more uppercase letters that show the facility to which the
message refers. A facility can be a hardware device, a protocol, or a module of the system software.
Table 1-1
lists the switch facility codes. These messages are described in
Recovery Procedures,"
in alphabetical order by facility code with the most severe (lowest number)
errors described first.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
C H A P T E R
Chapter 2, "Messages and
1
1-1
Advertisement
Table of Contents
