Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message SW_VLAN-4-VLAN_CREATE_FAIL: Failed to create VLANs [chars]: [chars].
Error Message SW_VLAN-6-OLD_CONFIG_FILE_READ: Old version [dec] VLAN configuration
file detected and read OK. Version [dec] files will be written in the future.
TCAMMGR Messages
This section contains the ternary content-addressable memory manager (TCAMMGR) messages.
Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
Error Message TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid.
OL-9641-01
Explanation
This message means that the specified VLANs could not be created. The port manager
might not have completed the VLAN creation requests because the VLANs already exist as internal
VLANs. The first [chars] is the VLAN ID, and the second [chars] describes the error.
Check the internal VLAN usage by using show vlan internal usage privileged
Recommended Action
EXEC command, reconfigure the feature that is using the internal VLANs, and try to create the
VLANs again. If this message appears again, copy the message exactly as it appears on the console
or in the system log. Research and attempt to resolve the error by using the Output Interpreter. Enter
the show tech-support user EXEC command to gather data that might help identify the nature of
the error. Use the Bug Toolkit to look for similar reported problems. If you still require assistance,
open a case with the TAC, or contact your Cisco technical support representative, and provide the
representative with the gathered information. For more information about these online tools and about
contacting Cisco, see the
"Error Message Traceback Reports" section on page
This message means that the VLAN software detected an old version of the VLAN
Explanation
configuration file format. It interpreted the file without a problem, but it will create files using the
new format in the future. The first [dec] is the old version number, and the second [dec] is the new
version number.
Recommended Action
No action is required.
This message means that the specified CAM region is configured as a static region with
Explanation
a fixed number of entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Explanation
This message means that the CAM handle used by the caller is not valid. [hex] is the
handle value.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
1-4.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
TCAMMGR Messages
1-4.
"Error
2-75
Advertisement
Table of Contents
