Installing Modules, Interface Cards, And Power Supplies - Cisco 2691 - VPN Bundle Router Hardware Installation Manual

Installing Modules, Interface Cards, and Power Supplies

Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed
to support the weight of the unit. Statement 1032
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Note
See the
and equipment that might be required for your installation.

Installing Modules, Interface Cards, and Power Supplies

Cisco routers are normally shipped with network modules, WAN interface cards (WICs), voice interface
cards (VICs), advanced integration modules (AIMs), and power supplies already installed. If you need
to remove or install any of these items, refer to the applicable documents online.
For network modules:
•
•
For WICs and VICs:
•
•
For AIMs:
•
•
Cisco 2600 Series Routers Hardware Installation Guide
3-2
"Tools and Equipment for Installation and Maintenance" section on page 2-6
Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700
Series Routers
Cisco Network Modules Installation Guide
Quick Start Guide: Interface Cards for Cisco 1600, 1700, 2600, 3600, and 3700 Series
Cisco Interface Cards Installation Guide
AIM Installation Quick Start Guide: Cisco 2600, 3600, and 3700 Series
Installing Advanced Integration Modules in Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700
Series Routers
Chapter 3 Installing the Router
for a list of tools
OL-2171-06