Installing Modules, Interface Cards, And Power Supplies - Cisco 3700 Series Hardware Installation Manual

Installing the Router
This chapter describes how to install your Cisco 3700 series router and connect it to networks and
external devices. It includes the following sections:
•
•
•
•
•
•
•
•
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017

Installing Modules, Interface Cards, and Power Supplies

Cisco routers are normally shipped with network modules, WAN interface cards (WICs), voice interface
cards (VICs), advanced integration modules (AIMs), and power supplies already installed. If you need
to remove or install any of these items, see the applicable documents online.
For network modules:
•
•
OL-2180-08
Installing Modules, Interface Cards, and Power Supplies, page 3-1
Setting Up the Chassis, page 3-2
Installing the Chassis Ground Connection, page 3-8
Power Connections, page 3-11
Connecting WAN, LAN, and Voice Cables, page 3-20
Connecting to a Console Terminal or Modem, page 3-22
Powering Up the Router, page 3-26
Configuring the Router, page 3-29
Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700
Series Routers
Cisco Network Modules Hardware Installation Guide
C H A P T E R
Cisco 3700 Series Routers Hardware Installation Guide
3
3-1