Cisco 2691 - VPN Bundle Router Hardware Installation Manual page 27

Chapter 1 Overview of Cisco 2600 Series Routers
Figure 1-9
Table 1-4
LED
LINK
ACT
FDX
100 Mbps
OL-2171-06
Cisco 2651—Rear-Panel LEDs
Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers—Rear-Panel LEDs
Description
When on, a link has been established with the hub or switch at the
other end of the cable.
Packets are being transmitted or received on the Ethernet interface.
When on, the interface is in full-duplex mode. When off, the
interface is in half-duplex mode.
When on, the speed of the interface is 100 Mbps. When off, the
speed of the interface is 10 Mbps.
Cisco 2600 Series Routers Hardware Installation Guide
Reading the Rear-Panel LEDs
1-7