Chapter 3
Installing the Router
Figure 3-17 Mounting the Chassis on the Wall
After the router has been installed, you must connect the chassis to a reliable earth ground. For the
chassis ground connection procedures, see the
page
Installing the Chassis Ground Connection
All Cisco 2600 series router chassis require a reliable earth ground connection. You must connect the
chassis to a reliable earth ground; the ground wire must be installed in accordance with local electrical
safety standards.
•
•
•
OL-2171-06
3-13.
For NEBS-compliant grounding, use size AWG 6 (13 mm
accessory kit.
For NEC-compliant grounding, use size AWG 14 (2 mm
user-supplied ring terminal.
For EN/IEC 60950-compliant grounding, use size AWG 18 (1 mm
appropriate user-supplied ring terminal.
Installing the Chassis Ground Connection
"Installing the Chassis Ground Connection" section on
2
) wire and the ground lug provided in the
2
) or larger wire and an appropriate
2
) or larger wire and an
Cisco 2600 Series Routers Hardware Installation Guide
3-13