Voice Interface Numbering; System Specifications - Cisco 2691 - VPN Bundle Router Hardware Installation Manual

Chapter 1 Overview of Cisco 2600 Series Routers

Voice Interface Numbering

Voice interfaces are numbered as follows:
chassis-slot/voice-module-slot/voice-interface
If a 4-channel voice network module is installed in chassis slot 1, the voice interfaces are:
•
•
•
•

System Specifications

Table 1-6
Description
Dimensions (H x W x D)
Weight
Input voltage, AC power supply
Current
Frequency
Power dissipation
Input voltage, DC power supply
Current
Power dissipation
Operating environment
Nonoperating temperature
Operating humidity
Noise level
Regulatory compliance
Safety compliance
1. Btus = British thermal units
OL-2171-06
1/0/0—Chassis slot 1/Voice module slot 0/Voice interface 0
1/0/1—Chassis slot 1/Voice module slot 0/Voice interface 1
1/1/0—Chassis slot 1/Voice module slot 1/Voice interface 0
1/1/1—Chassis slot 1/Voice module slot 1/Voice interface 1
Cisco 261x, Cisco 262x, and Cisco 265x System Specifications
Specification
1.69 x 17.5 x 11.8 in. (4.3 x 44.5 x 30 cm), one rack unit height
10.25 lb (4.66 kg)
100 to 240 VAC
1.5 A
47 to 63 Hz
75 W (maximum), 260 Btus
–38 to –75 VDC
2.0 A
75 W (maximum), 260 Btus/hr
32 to 104 F (0 to 40 C)
–40 to 158 F (–40 to 70 C)
5 to 95 percent, noncondensing
38 dBa (minimum)
FCC Class B and Canadian DOC Class A
For more compliance information, refer to the
Cisco 3600 Series, and Cisco 3700 Series Regulatory Compliance
and Safety Information document that accompanied your router.
UL 60950; CAN/CSA C22.2 No. 60950-00; IEC 60950;
AS/NZS 3260; TS001
Cisco 2600 Series Routers Hardware Installation Guide
System Specifications
1
/hr
Cisco 2600 Series,
1-11