Step 5 Setup Time Zone; Step 6 Setup Complete - TRENDnet TV-IP612P User Manual

TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera

Step 5 Setup Time Zone

Use this step to configure the Time and Date, the Time Zone and the Daylight savings
configuration of the camera.
Time Zone: Select the Time Zone for your camera in
the drop-down list.
Enable Daylight Saving: Select this to enable
Daylight Savings for the Time Zone you have chosen
above. This will automatically set daylight savings
time depending on the date and time for each time
zone.
Keep current date and time: Select this choice to
prevent any time and date changes from the current
setting.
Synchronize with NTP Server: Select this choice to enable NTP time slaved to the NTP server
identified below.
NTP Server: Enter the NTP server address or hostname
Set date and time manually: Use this setting and the entry boxes below to enter the date and
time desired as a manual configuration.
Copy Your Computer's Time Settings: Click this button to automatically set the time and date
based on your computer's settings.
Click Next to go to Step 6

Step 6 Setup Complete

Carefully review your settings and then click Apply to
finish the wizard.
The camera will reboot to apply the new settings:
35