Table of Contents
Advertisement
Problem 2:
Solution 2:
Problem 3:
Solution 3:
Problem 4
Solution 4
Problem 5
Solution 5
Page 38
Disk Server's printer is not listed on my Mac.
On the Disk Server's System - Printer screen, check the Printer
Object Type. If this is not correct, the Disk Server's printer will not
be listed on the Macintosh.
Check the Printer's User Manual for this data, or contact the
printer supplier.
On each Mac, check that the Printer Driver is installed.
If not using a LaserWriter, each Mac must have the printer driver
for the printer installed. Otherwise, the correct printer type can
not be selected, so the Disk Server will not be listed.
The printer does not work at all, or does not work properly.
On the Disk Server System - Printer screen, check the following:
Printer Connected to the Disk Server is set correctly ("Laser-
Writer" or "Other").
Printer Object Type is set correctly. If this is incorrect, then Mac
clients may be able to select an incorrect printer.
The printer was working, but now it doesn't. The printer seems OK,
and no error message is di splayed.
This can happen if the amount of free disk space is not sufficient to
spool (queue) the print job. Disk Usage can be checked using the
Status - Disk screen on the Administrator interface.
If this is the problem, you must delete some print jobs, as follows:
Using the Administrator interface, select Status - Printer.
Use the Delete current job to delete the current print job, or
Delete all jobs to delete all print jobs.
These options can als o be used if for some reason a print job or jobs
does not print correctly.
When using the Web interface, some of the data will not fit on the
screen, and there is no scrollbar.
You must reduce the font size. In your Browser, select View - Fonts to
change the font size.
Advertisement
Table of Contents
