Table of Contents
Advertisement
Connecting to the Disk Server
Windows Users
Administration
Other Users
1.
Start the Disk Server Utility, and select the desired Disk Server.
2.
Click the Administration icon.
3.
You will be prompted for the password, as shown below
Enter admin for the User Name. By default, there is no password, but if you have
set a password for the admin user, enter it here.
You will then see the Welcome screen. If you have multiple Disk Servers, you
can use the Connect button to switch to another Disk Server.
Click the Administration button to proceed to the Main Menu. See the next sec-
tion for details.
1.
Start your WEB browser
In the Address box, enter the following:
HTTP://ip_address
Where ip_address is the IP Address of the Disk Server, as in the following
example:
HTTP://192.168.0.2
2.
You will be prompted for the password, as shown in Figure 6: Password Prompt
above. Enter admin for the User Name. By default, there is no password for the
admin user, but if you have set a password, you must enter it here.
You will then see the first screen. If you have multiple Disk Servers, you can use
the Connect button to switch to another Disk Server. Otherwise, click the Ad-
ministration button to proceed to the Main Menu.
Figure 6: Password Prompt
Page 15
Advertisement
Table of Contents
