Table of Contents
Advertisement
Printer Setup for Macintosh
Configure the
Printer Port
If using a LaserWriter, no setup is required. Just follow the procedure in Chapter
5 - Macintosh Client Setup.
If not using a LaserWriter, Mac clients must install the printer driver for the Disk
Server's printer.
Also, the System - Printer Port screen (below) must be correct. Select "Other" for
Printer connected to Disk Server and ensure the Printer Object Type is correct.
Check your printer's documentation to find the Printer Object Type.
Once this is done, the procedure in Chapter 5 - Macintosh Client Setup can be per-
formed.
Windows Clients
The correct printer name should be entered on the System -
Printer screen. This has no effect on operation, but helps
uses identify the printer when they browse the network.
Macintosh Clients
See the following section.
Figure 9: System - Printer tab
Page 23
Advertisement
Table of Contents
