Table of Contents
Advertisement
Disk Server Setup using Windows
Software Installation
Using the Disk Server Utility
For basic operation, only the following setup is required.
For the full range of options available to the Network Administrator, refer to
Chapter 3 - Administration.
1.
Insert the supplied CD-ROM into the drive of your Windows 95/98 or Windows
NT4.0/2000 system.
2.
If the SETUP program does not start automatically, run SETUP.EXE in the root
directory.
3.
Follow the prompts to install the Disk Server Utility.
1.
Start the program. For the default installation, use Start - Programs - Disk
Server - Disk Server Utility.
2.
The screen will look like the example below. The left section displays a list of all
Disk Servers. The right section displays data about the currently-selected Disk
Server. (If no Disk Servers are listed, see the Troubleshooting section.)
Figure 2: Disk Server Utility
Page 7
Advertisement
Table of Contents
