Using the Disk Server's Storage
Page 28
To use the Disk Server's storage, you must "Map" a drive letter to each folder on the
Disk Server folder which you wish to access. The "Network Drive" will then be avail-
able to all Windows programs. The procedure is as follows:
1.
Double-click the Network Neighborhood icon on the desktop.
2.
On the "View" menu, select Details. The Comment column will now be visible.
3.
Locate the Disk Server, as shown below. If it is not listed, double-click Entire
Network. Then double-click the Workgroup that the Disk Server is in. (By de-
fault, the Disk Server is in Workgroup.)
4.
Double-click the icon for the Disk Server.
5.
Right-click a folder (directory) to which you have access, and select Map Net-
work Drive, as shown below.
Figure 13: Network Browse