Guided Setup & Activation - DirecTV D10 User Manual

Getting Connected
TIP
Want to fi nish setting up some
of the functions later? Just
press MENU on your remote,
press SELECT on Settings then
select Setup.
26
Guided Setup and Activation
Guided Setup & Activation
Now that your receiver and equipment are all hooked up and plugged in, you're ready to
fi nish all the details to begin receiving your DIRECTV service.
1) Make sure the MODE SWITCH on the remote control is set to DIRECTV.
2) Press TV POWER ON. The DIRECTV Receiver will turn on.
3) The fi rst screen will allow you to select a language. Using the arrow keys on the remote
control, move to the language you prefer.
4) Press SELECT on the remote control.
5) You will see a Welcome screen.
Now, let us lead the way...
and simply follow the on-screen directions to complete your setup functions. If you've
installed your satellite dish and system yourself, you'll be guided though various functions
for optimizing your signal and setup — including positioning your dish and a system test. If,
like most people, you had your system professionally installed, these functions already have
been completed.
After these setup procedures are complete, you'll see the Satellite Data Acquisition screen, as
the receiver gathers information from the satellite for the on-screen program guide.
Next, you'll be given the opportunity to set up your phone connection, as well as program
your remote to control other equipment such as your VCR and/or DVD player. Just follow
the screen suggestions and you'll be ready to watch in no time!
25