Configuring A Powerline Network - D-Link DHP-1320 User Manual

Section 1 - Product Overview
Connecting two PowerLine AV devices for the first time
To initially connect the DHP-1320 AV to another PowerLine AV device and create a network:
1. Plug the DHP-1320 into a power outlet. Press the ENY button for 1 to 3 seconds. The PowerLine AV LED
2. Plug the other PowerLine device (e.g. the DHP-W306AV) into a power outlet. Press the ENY button on this PowerLine device for 1 to 3 seconds.
3. Wait for both devices to reboot (all LEDs will turn off and on). When the PowerLine AV LEDs on both devices are steadily lit, the two devices will
be networked together.
Room A
D-Link DHP-1320 User Manual

Configuring a PowerLine Network

DHP-1320
LAN INTERNET RESET USB ON/OFF AC IN
1 2 3
AR RT
DHP-W306AV
INTERNET
DHP-W306AV
should start to blink.
Room B
Room C
17