System Settings - D-Link DHP-1320 User Manual

Section 3 - Configuration
Save Settings to Use this option to save the current router configuration
Local Hard Drive: settings to a file on the hard disk of the computer you
are using. First, click the Save button. You will then
see a file dialog, where you can select a location and
file name for the settings.
Load Settings
Use this option to load previously saved router
from Local Hard
configuration settings. First, use the Browse control
Drive:
to find a previously save file of configuration settings.
Then, click the Load button to transfer those settings
to the router.
Restore to
This option will restore all configuration settings
Factory Default
back to the settings that were in effect at the time
Settings:
the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router configuration settings, use the Save
button above.
Reboot Device:
Click to reboot the router.
D-Link DHP-1320 User Manual

System Settings

127