D-Link DHP-1320 User Manual page 117

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
LAN Connection
Use the drop-down menu to select Dynamic IP (DHCP)
Type:
to automatically obtain an IP address on the LAN/private
network.
Device Name:
Enter the Device Name of the AP. Changing the Device
Name is recommended if there is more than one D-Link
device within the subnet.
Save Settings:
Click Save Settings to save and activate the
new changes.
D-Link DHP-1320 User Manual
Network Settings - DHCP
112