D-Link DHP-1320 User Manual page 89

Section 3 - Configuration
IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use the following DNS Address.
Primary/Secondary
Enter the primary and secondary DNS server addresses.
DNS Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router's LAN Link-Local Address.
Address:
Enable
Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless.
Type:
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
Start:
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local computers.
End:
IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes).
D-Link DHP-1320 User Manual 84