Status; Device Info - D-Link DHP-1320 User Manual

Section 3 - Configuration
This page displays the current information for the DHP-1320. It will display the LAN, WAN (Internet), and Wireless information. If your Internet
connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your
ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE
connection and use Connect to establish the PPPoE connection.
General: Displays the router's time and firmware version.
WAN: Displays the MAC address and the public IP settings for
the router.
LAN: Displays the MAC address and the private (local) IP settings
for the router.
Wireless LAN:
Displays the wireless MAC address and your wireless
settings such as SSID and Channel.
LAN Computer:
Displays computers and other devices which are connected
to the router via Ethernet, and that are receiving an IP
address assigned by the router CDHCP).
IGMP Multicast
Displays the Multicast Group IP address.
Memberships:
D-Link DHP-1320 User Manual

Status

Device Info

95