Table of Contents
Advertisement
DES-3228PA Embedded Web System User Guide
Defining Queues
The Queue Page contains fields for defining the QoS queue forwarding types. To set the queue settings:
1.
Click Basic Setup > Quality of Service > General Settings > Queue. The Queue Page opens.
Figure 108:Queue Page
The Queue Page contains the following fields:
•
Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.
•
SDWRR — Assigns Shaped Deficit WRR weights to queues. This field is enabled only for queues in SDWRR
queue mode. Each queue has a predefined weight that cannot be modified.
•
Queue — Displays the CoS queue for which the queue weight or bandwidth percentage is set.
•
Scheduling
–
SDWRR Weight — Displays the SDWRR weight assigned to the queue.
–
% of SDWRR Bandwidth — Assigns the specific WRR bandwidth percentage to the Queue.
2.
Select Strict Priority or SDWRR Fields.
3.
Click
. The queue settings are set, and the device is updated.
Page 173
Advertisement
Table of Contents
