Defining Access Profiles - D-Link xStack DES-3228PA Web/Installation Manual

DES-3228PA Embedded Web System User Guide

Defining Access Profiles

Access profiles are profiles and rules for accessing the device. Access to management functions can be limited to
user groups. User groups are defined for interfaces according to IP addresses or IP subnets. Access profiles con-
tain management methods for accessing and managing the device. The device management methods include:
•
All
•
Telnet
•
Secure Telnet (SSH)
•
HTTP
•
Secure HTTP (HTTPS)
•
SNMP
Management access to different management methods may differ between user groups. For example, User
Group 1 can access the switch module only via an HTTPS session, while User Group 2 can access the switch
module via both HTTPS and Telnet sessions. The Access Profile Page contains the currently configured access
profiles and their activity status.
Assigning an access profile to an interface denies access via other interfaces. If an access profile is assigned to
any interface, the device can be accessed by all interfaces. To configure access profiles:
1. Click System > Management Security > Authentication > Access Profiles. The Access Profile Page
opens.
Figure 57: Access Profile Page
The Access Profile Page contains the following fields:
•
Access Profile Name — Defines the access profile name. The access profile name can contain up to 32
characters.
•
Active Profile — Defines the access profile currently active.
Page 107