Using Screen And Table Options - D-Link xStack DES-3228PA Web/Installation Manual

DES-3228PA Embedded Web System User Guide

Using Screen and Table Options

D-Link contains screens and tables for configuring devices. This section contains the following topics:
•
Adding Configuration Information
•
Modifying Configuration Information
•
Deleting Configuration Information
Adding Configuration Information
User-defined information can be added to specific D-Link Web Interface pages, by opening a new Add page. To
add information to tables or D-Link Web Interface pages:
1. Open an D-Link Web Interface page.
2. Click System > SNTP > Interface Setting. The Add SNTP Interface page opens.
3. Click . An add page opens, such as the Add SNTP Interface Page:
Figure 14: Add SNTP Interface
4. Define the fields.
5. Click . The configuration information is saved, and the device is updated.
Modifying Configuration Information
1. Open The D-Link Embedded Web Interface page.
2. Select a table entry.
3. Click . A modification page, such as the IP Interface Settings Page opens:
Page 43