DXS/DWS-3200 series CLI Reference Guide
priority-queue out num-of-queues
The priority-queue out num-of-queues Global Configuration mode command configures the number of expedite
queues. To restore the default configuration, use the no form of this command.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
Parameters
•
number-of-queues — Specifies the number of expedite queues. Expedite queues have higher indexes.
(Range: 0-8)
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
Configuring the number of expedite queues affects the Weighted Round Robin (WRR) weight ratio because fewer
queues participate in the WRR.
Example
The following example configures the number of expedite queues as 0.
Console(config)# priority-queue out num-of-queues 0
Page 233