Defining Snmp Notification Global Parameters - D-Link xStack DES-3228PA Web/Installation Manual

Defining SNMP Notification Global Parameters

The SNMP Notification Properties Page contains parameters for defining SNMP notification parameters. To define
SNMP notification global parameters:
1. Click System > SNMP > Notification > Properties. The SNMP Notification Properties Page opens:
Figure 125:SNMP Notification Properties Page
The SNMP Notification Properties Page contains the following fields:
•
Enable SNMP Notifications — Specifies whether the device can send SNMP notifications. The possible
field values are:
–
Enable — Enables SNMP notifications.
–
Disable — Disables SNMP notifications.
•
Enable Authentication Notifications — Specifies whether SNMP authentication failure notification is
enabled on the device. The possible field values are:
–
Enable — Enables the device to send authentication failure notifications.
–
Disable — Disables the device from sending authentication failure notifications.
2. Define the Enable SNMP Notification and Enable Authentication Notifications fields.
3. Click . The SNMP notification properties are defined, and the device is updated.
Page 192
Configuring SNMP
Configuring SNMP Notifications