D-Link DES-6000 User Manual page 69

Modular Ethernet Switch User's Guide
Choose Configure Port-based VLAN Entry from the Port-based VLAN Configuration menu (when the
switch is in Port-based VLAN mode). The following screen appears:
The fields you can set are:
♦ VLAN ID (VID) Enter a VLAN ID from 1 to 24. This is the VLAN that will be defined on this screen.
VID 1 is the default VLAN. All ports are designated members of VID 1 when VLANs are enabled. When a
port is assigned to another VLAN, it is removed from VLAN 1. If it is ever removed from the other VLAN,
it will automatically return to being a member of VLAN 1. Thus, all unassigned ports are automatically
members of VLAN 1.
♦ VLAN Name Description of the VLAN.
♦ Port Assignments Position the cursor over the dash "–" representing the appropriate port number and
press <space bar> to select "V" for member. Pressing <space bar> again returns the 'V' back into a '–'. A
dash (-) means the port is not given VLAN membership for the VID entered above. An 'X' shows that the
port belongs to a different VLAN.
♦ Clear Erases the VLAN name and all port assignment settings.
Choose Browse Port-based VLANs from the screen above to view the current Port-based VLAN settings.
64
Figure 6-47. Port-based VLAN Configuration screen
Figure 6-48. Browse Port-based VLANs screen
Using the Console Interface