D-Link DES-6000 User Manual page 107

♦ Egress/Forbidden/Non-Member Position the cursor over the dash "–" representing the appropriate
port number and press <space bar> to select E for Egress, F for Forbidden or leave the dash "–". An E
designates the specified port as a static member of the VLAN. An F defines the port as a non-member and
also forbids the port from joining a VLAN dynamically. A dash (–) means the port is not given VLAN
membership for the VID entered above.
♦ Clear Erases the VLAN name and deselects any Egress or Forbidden settings.
Click on the Switch GMRP icon to access the following window:
This screen allows you to Enable or Disable Group Multicast Registration Protocol (GMRP) globally for entire
switch. When GMRP is Enabled, a user attached to the switch can dynamically join a multicast group. When
GMRP is Disabled, then no dynamic multicast group registration is allowed on the switch.
Click on the Port GMRP icon to access the following window:
102
Figure 7-39. Switch GMRP window
Figure 7-40. Port GMRP window
Modular Ethernet Switch User's Guide
Web-Based Network Management