D-Link DES-6000 User Manual page 66

Modular Ethernet Switch User's Guide
Figure 6-41. Browse 802.1Q VLANs screen
This table displays the current VID number and VLAN Name as well as Tag/Untag and Egress (membership)
status for all 802.1Q static VLAN entries. Use the N key to move to the next page and the P key to move to
the previous page.
Choose GMRP Configuration at the bottom of the VLAN Configuration screen (when the switch is in
802.1Q VLAN mode) to access the following screen:
Figure 6-42. GMRP Configuration screen
This screen allows you to Enable or Disable Group Multicast Registration Protocol (GMRP) globally for entire
switch. When GMRP is Enabled, a user attached to the switch can dynamically join a multicast group. When
GMRP is Disabled, then no dynamic multicast group registration is allowed on the switch.
Choose Configure Port GMRP Settings from the of the GMRP Configuration screen (when the switch is
in 802.1Q VLAN mode) to access the following screen:
Using the Console Interface 61