D-Link DES-6000 User Manual page 68

♦ State<Permanent
and Invalid. Permanent marks the entry as always being a member of the multicast group. Delete on
Reset marks the entry as active until the switch is reset (rebooted), at which time, the entry will be
deleted. Delete on Timeout marks the entry as active until the IGMP age-out timer expires. If the
IGMP age-out timer expires, the entry will be deleted.
immediately.
Choose Browse Static Multicast Forwarding Table from the of the Static Multicast Forwarding
Table Configuration screen (when the switch is in 802.1Q VLAN mode) to access the following screen:
This screen displays the current Static Multicast Forwarding Table entries. It is a read-only table.
Configure Port-based VLANs
Choose Configure Port-based VLANs from the VLANs & MAC-based Broadcast Domains
Configuration menu (when the switch is in Port-based VLAN mode). The following screen appears:
The Management Vlan ID: [ ] field allows the entry of the VLAN ID (VID) of the VLAN on which the
management station (usually a computer used to manage the switch) is located.
Using the Console Interface
> can be toggled between Permanent, Delete on Reset, Delete on Timeout,
Figure 6-45. Browse Static Multicast Forwarding Table screen
Figure 6-46. Port-based VLAN Configuration screen
Modular Ethernet Switch User's Guide
Invalid marks the entry to be deleted
63