D-Link DES-6000 User Manual page 46

The fields you can set are:
♦ System Name Corresponds to the SNMP MIB II variable
name to the Switch for administrative purposes. The Switch's fully qualified domain name is often
used, provided a name has been assigned.
♦ System Location Corresponds to the SNMP MIB II variable
indicate the physical location of the Switch for administrative purposes.
♦ System Contact Corresponds to the SNMP MIB II variable
name and contact information for the person responsible for administering the Switch.
Switch Module Information
This screen allows you to view information for each module in your switch, including the Module, Type, and
Hardware Version. Press Switch Module Information on the Switch Module Configuration screen to
access the Switch Module Information screen:
Advanced Settings
The Configure Advanced Switch Features screen allows you to set Head Of Line Blocking Prevention as
well as to enable or disable auto-partitioning on all ports. Press ADVANCED SETTINGS on the Switch
Module Configuration screen to access the Configure Advanced Switch Features screen:
Using the Console Interface
Figure 6-11. Switch Module Configuration screen
Figure 6-12. Switch Module Information screen
Modular Ethernet Switch User's Guide
, and is used to give a
system.sysName
system.sysLocation
, and is used to give the
sysContact
, and is used to
41