Management Station Ip Addresses - D-Link DES-3226L Manual

DES-3226L Layer 2
The following parameters can be set:
Parameter
User Name
Group Name
encrypted
Method
Auth-Protocol
Priv-Protocol

Management Station IP Addresses

Management stations are computers on the network that will be used to manage the switch.
You can limit the number of possible management stations by entering up to three IP
addresses. If the three IP Address fields contain all zeros ("0"), then any station with any IP
address can access the switch to manage and configure it. If there is one or more IP addresses
entered in the IP Address fields, then only stations with the IP addresses entered will be
allowed to access the switch to manage or configure it. To view and configure the
Management Station IP window, open the Basic Setup folder, then click Network
Management > Management Station IP Addresses, which opens the following screen.
Fast Ethernet Switch User's Guide
Description
An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
This name is used to specify the SNMP group created that can request
SNMP messages.
Checking the corresponding box will enable encryption for SNMP V3 and is
only operable in SNMP V3 mode. This will also make the Method, Auth-
Protocol and PrivProtocol parameters operable.
The user may choose between by_password and by_key for the method of
encryption used for the SNMP function.
None − Indicates that no authorization protocol is in use.
MD5 − Indicates that the HMAC-MD5-96 authentication level will be used.
SHA − Indicates that the HMAC-SHA authentication protocol will be used
None − Indicates that no authorization protocol is in use.
DES − Indicates that DES 56-bit encryption is in use based on the CBC-
DES (DES-56) standard.
Figure 5-23. Management Station IP Addresses window
42
.
\