DES-3226L Layer 2
Fast Ethernet Switch User's Guide
Serial Port Settings
The Serial Port Settings window may be found in the Basic Setup folder. This window is
used to configure the console settings for the Command Line Interface or for a Telnet session.
Figure 5-6. Serial Port Settings window
The Serial Port Settings window is used to change and view the Console settings for your
switch. The default Baud Rate for this switch is set at 9600 and may be altered from 119200,
38400, to 115200 to perform different functions. Data Bits, Parity Bits and Stop Bits are
read only fields and cannot be changed using the web-based manager. The Auto Logout field
may be set to Never, 2 minutes, 5 minutes, 10 minutes, and 15 minutes, depending on the time
the user wishes the Switch to be idle before automatically logging out. The default for this
setting is 10 minutes.
30