User Accounts - D-Link DES-3226L Manual

DES-3226L Layer 2

User Accounts

From the Basic Setup menu, click User Accounts and the following window appears.
Click New to add a new user account, utilizing the window below.
Enter the new user name, assign an initial password, and then confirm the new
1.
password. Determine whether the new user should have Admin or User privileges.
Click Apply to make the user addition effective.
2.
A listing of all user accounts and access levels is shown in the User Account
3.
Management window. This list is updated when Apply is executed. Click Show All
User Account Entries to access this window.
Please remember that Apply makes changes to the switch configuration for the current
4.
session only. All changes (including User additions or updates) must be entered into
non-volatile ram using the Save Changes command on the Main Menu - if you want
these changes to be permanent.
To edit a User Account, click the radio button of the corresponding User Account and click
Edit. To delete a User Account, click the radio button of the corresponding User Account and
click Delete.
Fast Ethernet Switch User's Guide
Figure 5-9. User Accounts window
Figure 5-10. User Accounts – Add window
33