Installing The Switch Without The Rack; Installing The Switch In A Rack - D-Link DES-3226L Manual

DES-3226L Layer 2
Install the Switch in a site free from strong electromagnetic field generators (such as
•
motors), vibration, dust, and direct exposure to sunlight.
When installing the Switch on a level surface, attach the rubber feet to the bottom of
•
the device. The rubber feet cushion the Switch, protect the casing from scratches and
prevent it from scratching other surfaces.

Installing the Switch Without the Rack

When installing the Switch on a desktop or shelf, the rubber feet included with the Switch
should first be attached. Attach these cushioning feet on the bottom at each corner of the
device. Allow enough ventilation space between the Switch and any other objects in the
vicinity.
Figure 2-1. Prepare Switch for installation on a desktop or shelf

Installing the Switch in a Rack

The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide you.
Fasten the mounting brackets to the Switch using the screws provided. With the brackets
attached securely, you can mount the Switch in a standard rack as shown in Figure 2-3 on the
following page.
Fast Ethernet Switch User's Guide
Figure 2-2. Fasten mounting brackets to Switch
9