Information You Will Need About Your Dsl-526E Modem Router; Username; Password; Lan Ip Addresses For The Dsl-526E - D-Link dsl-526e User Manual

Hide thumbs Also See for dsl-526e:
Table of Contents

Advertisement

Information you will need about your DSL-526E Modem Router

Username

This is the Username needed to access the Router's management interface. When you attempt to connect to the device through a web browser you
will be prompted to enter this Username. The default Username for the Router is "admin". The user cannot change this.

Password

This is the Password you will be prompted to enter when you access the Router's management interface. The default Password is "admin." The
user may change this.

LAN IP addresses for the DSL-526E

This is the IP address you will enter into the Address field of your web browser to access the Router's configuration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.

LAN Subnet Mask for the DSL-526E

This is the subnet mask used by the DSL-526E and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be
changed later.

Information you will need about your LAN or computer

Ethernet NIC

If your computer has an Ethernet NIC, you can connect the DSL-526E to the Ethernet port using an Ethernet cable. You can also use the Ethernet
ports on the DSL-526E to connect to other computers or Ethernet devices.

DHCP Client status

Your DSL-526E Modem Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask and a
default gateway address to computers on your LAN. The default range of IP addresses the DSL-526E will assign are from 192.168.1.2 to
192.168.1.254. Your computer (or computers) needs to be configured to obtain an IP address automatically (that is, they need to be configured
as DHCP clients.)
It is recommended that you collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL
connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-526E Modem Router.
D-Link DSL-526E User Manual
Installation
11

Advertisement

Table of Contents
loading

Table of Contents