DES-3226L Layer 2
Fast Ethernet Switch User's Guide
802.1X Accounting Client
This is a read-only field is used to display the RADIUS Accounting information on the
switch. To view this window, click Basic Setup > Network Monitoring > 802.1X
Accounting Client.
Figure 5-41. RADIUS Accounting Client Table window
Factory Reset
The following window allows you to Reset, Reset Config, or Reset System. See the on-
screen instructions for the differences among each option.
Note that all changes are kept in normal memory. If a user does not save the result into NV-
RAM with the Save Changes function, the switch will recover all the settings the last user
configured after the switch is rebooted.
Figure 5-42. Factory Reset window
Save Changes
The DES-3226L has two levels of memory, normal RAM and non-volatile or NV-RAM.
To retain any configuration changes permanently, highlight Save Changes on the Basic
Setup menu. The following windows will appear to verify that your new settings have been
saved to NV-RAM.
57