D-Link DCS-6620 User Manual page 78

DCS-6620 User's Manual
Monitor Program (continued)
The Admin Privilege
In the monitor tool system, the admin privilege has the right to access the DCS-6620 PTZ
Internet Camera through this application software and change the local settings as well. But
the admin privilege is not the same as the admin privilege as the PTZ Internet Camera. You
can change the settings of each selected PTZ Internet Camera in the remote site only if you
have the admin privilege of the PTZ Internet Camera.
If you have the admin privilege, you have the right to do the following items:



Again, if you need to change the settings of the DCS-6620, you must have the password of
the admin user.
Camera Configurations
When you log in for the first time, you should configure this application software to connect
the DCS-6620 in "Configuration Menu > Camera Configurations", shown in the figure below.
You will need the admin (administrator) privilege in order to run the configuration.
Once you click "Configuration Menu > Camera Configurations" for setting each camera, all
recording processes will be stopped with a warning window popped up in advance to keep
you informed.
D-Link Systems, Inc.
Run the configuration tool
Change the recording schedule
Change the local settings
Using IP surveillance Software
78