D-Link DCS-6620 User Manual page 53

DCS-6620 User's Manual
Configuration > Advanced >Camera Control (continued)
Enable IR Control:
Zoom times display:
Apply
Click
changes effective
D-Link Systems, Inc.
Enter a name for the position at which you would like to preset
Current Position:
the DCS-6620. Click Add to add the new preset position to the
Preset Locations list.
Using the pull down menu, you can delete a preset position
Preset Position:
by selecting it and clicking Delete.
Dwelling Time:
Set the value of time that the camera will remain on each preset
position before moving to the next. The dwelling time can be
set between 1 and 255 seconds.
Click this to allow the DCS-6620 to be controlled by the included
remote.
Checking this box allows the Administrator to display the zoom
magnitude on the transmitted video.
Patrol Selection: To use the Auto Patrol feature, select the desired preset
positions from the Preset Locations list and add them to the
Selected Locations list by clicking Select
the order in which the camera will patrol through the
preset locations by selecting a location and clicking UP
or DN. Click Remove to remove a location from the list.
The button is valid for "Pan speed", "Tilt speed", "Tilt speed", "Auto
Save:
pan/patrol speed", "Enable IR control", "Dwelling time" and "Patrol
selection". In other words, after changing these settings, and
the "Save" button is not clicked, the new setting of the camera
will not take effect.
to make
Using the DCS-6620 with an Internet Browser
. You can then select
53