D-Link DCS-6620 User Manual page 16

DCS-6620 User's Manual
Setup
On the initial Setup Screen you can configure
System and Date/Time settings for each camera.
Click Next to configure Network settings for the
camera.
System
Settings:
Date/Time
Settings:
Network
Settings:
Click Next and then Apply to save the configured
settings. Users can click Previous to modify
changes or mistakes.
D-Link Systems, Inc.
Enter a Camera Name and create an
Admin password for the camera.
Enter the Date and Time for each
camera. These settings can also
be configured on the Tools > System
screen (page 57) when configuring
the camera via a Web browser.
Here users can configure the Network
Settings for the camera. Enter the IP
address, Subnet mask, Default router
IP, Primary DNS, and Secondary
DNS. Automatically, the option to
reset IP address at boot is selected.
If you would like to save your IP
address settings, make sure to
uncheck this box.These settings can
also be configured on the Advanced
> Network screen (page 39) when
configuring the camera via a Web
Browser.
Installation Wizard Screen
16