Schedule Video Recording With Motion Detection - D-Link DCS-6620 User Manual

DCS-6620 User's Manual
Schedule Video Recording with Motion
Detection
To schedule video recording with motion detection, you must first enable motion detection on
the PTZ Internet Camera. Click the Motion Detection button under the Advanced tab from the
Configuration screen to access settings that affect how the DCS-6620 PTZ Internet Camera can
serve as a security device by recording only when motion is detected. Note: These settings
can be configured in your Web browser and while logged into the IP surveillance Program.
In this window, follow the steps below to ensure that motion detection is correctly enabled:
 Check "Enable motion detection."
 Click on "New" to have a new window to monitor video.
 Enter in a window name.
 Adjust the "Sensitivity" and "Percentage" levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.
 After adding the motion window, click on save to enable the activity display. You can
add up to 3 motion windows to trigger recording.
For detailed information about each setting, please refer to Configuration > Advanced > Motion
Detection in the section titled "Using the DCS-6620 With an Internet Browser" (page 52).
Next, run the IP surveillance program. Click on the Configurations button and select Scheduler.
D-Link Systems, Inc.
Click Motion Detection

Schedule Video Recording with Motion Detection

123