D-Link DCS-6620 User Manual page 110

DCS-6620 User's Manual Using IP surveillance Software
Playback Program (continued)
When you successfully log in to the playback system, the main window will be shown on
the top of the screen and the display resolution will be changed to 1024x768 automatically
(see previous page). There are four main areas , i.e. display area, histogram area, control
area, and status area. There are also three visualized controls , i.e. area selection indicator,
frame selection indicator, and pull bar. These features provide much more convenience while
searching recorded video in the IP surveillance database.
Main Areas
Display Area
The display area is able to show the surveillance database of each camera by time. You can
change the video size through the display adjustment tool and the playback method through
the play control tool. Under the normal display mode as shown in the figure below, you can
just double click on the frame area to change the frame size to 1:1 or 2.25:1.
Playback method
Display adjustment tool
D-Link Systems, Inc.
110