Table of Contents
Advertisement
Instruction Manual
Stand-alone DVR
6-8. Record
This system provides Watchdog function.
When power goes off during recording and the power turns on, the system will automatically start
recording.
6-8.1. Manual (Continuous) recording
▫ Click the SETUP icon on the MENU bar in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫ Select the MANUAL RECORDING (
and the TIMER RECORDING (
the same time by clicking the ALL (
clicking the MANUAL RECORDING (
The MOTION (
in this recording mode.
▫ Press the RECORD button on the front panel or click the RECORD icon on the MENU bar.
6-8.2. Manual Event Recording
▫ Click the SETUP icon on the MENU bar in the LIVE mode.
▫ Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫ Select the MANUAL RECORDING (
and the TIMER RECORDING (
the same time by clicking the ALL (
clicking the MANUAL RECORDING (
The MOTION (
in this recording mode.
▫ Press the RECORD button on the front panel or click the RECORD icon on the MENU bar.
) between the MANUAL RECORDING (
) as shown in Fig.6-23. All channels can be set at
) and SENSOR (
[Fig.6-23. Manual Recording setup]
) between the MANUAL RECORDING (
) as shown in Fig.6-24. All channels can be set at
) and SENSOR (
54
) or each of the channels can be set by
) on the CAM 1 through CAM 16.
) as shown in Fig.6-23 should be turned OFF
) or each of the channels can be set by
) on the CAM 1 through CAM 16.
) as shown in Fig.6-24 should be turned ON
)
)
Advertisement
Table of Contents
