7-7.2. Gateway, Subnet, Ip Address - Clover CDR-1650 Instruction Manual

7-7.2. GATEWAY, SUBNET, IP ADDRESS

▫ Click the GATEWAY / SUBNET / IP ADDRESS button in the STATIC IP MODE and the On
Screen Keyboard will appear.
▫ Delete the current values with the
On Screen Keyboard, and then click OK button to set with new address.
▫ Click the CANCEL button to return to the original values.
[Fig.7-93 IP Mode button]
[Fig.7-94 IP Mode pop-up window]
button and enter the address numbers by using
[Fig.7-95 Address Setup window]
[Fig.7-96 On Screen Keyboard]
117
7. Setup