Table of Contents
Advertisement
8.7
Record
Note. The Alarm recording functions regardless of the
recording mode. This means that when alarm signal is
received, the system automatically picks up the related
channel and records the input images in full screen
even if the system has been recording in the quad
► RECORD MODE
Choose RECORD in the SETUP menu with the navigation keys and press the
ENTER button.
Choose one among QUAD, MONITOR, CH1, CH2, CH3, and CH4, and press the
ENTER button.
In the QUAD mode, All 4 channels will be recorded.
In the MONITOR mode, what is displayed on the monitor will be recorded.
(Exception : zoom, PIP, freeze)
When CH1, CH2, CH3, or CH4 is selected only the corresponding channel will
be recorded.
► RECORD SPEED
Choose REC SPEED in the RECORD menu with the navigation keys and press the
ENTER button.
Select a speed rate between 1~30 F/S for NTSC and 1~25 for PAL.
► RECORD QUALITY
RECORD
REC MODE
: QUAD
REC SPEED
: 30 F/S
REC QUALITY
: +SVHS
REC MOTION : HIGH
MOTION HOLD : 5 SEC
POWER ON REC : OFF
HDD RECYCLE : ON
TIMER RECORD ☞
Fig. 8-23 Record Setup
- 36 -
Advertisement
Table of Contents
