Receive Midi Sysex Dumps - Clavia Nord Electro 2 User Manual

7. MIDI functions: Program and Controller dumps
R MIDI S
ECEIVE
To receive a MIDI Sysex Dump, do like this:
1. Connect a cable from the MIDI Out on the transmitting device to MIDI I
2. Initiate the transmission on the transmitting device.
If the dump contained all Programs (AL), it will replace all Programs currently stored in the Nord Electro
2. If the dump contained only a single Program (Pr), it will be temporarily placed in the currently selected
Program memory location. You will then have to store the Program manually to a memory location using
the Store function (see
Note: For Organ sounds, the complete settings for the sound will be received with the MIDI
Sysex file. For Piano sounds, all parameters will be received but not the actual instrument sam-
ples. Therefore, when receiving a Piano MIDI Sysex file, make sure the instrument samples are
already present in the Nord Electro 2. Otherwise the parameters of the Sysex file will be applied
to another available Piano instrument.
Page 44
D
YSEX UMPS
"Storing a Program" on page
NORD ELECTRO 2 V3.0x
17).
on the Nord Electro 2.
N