Store; Program Buttons; Octave Shift; The Shift Button - Clavia Nord Electro 2 User Manual

NORD ELECTRO 2 V3.0x
S
TORE
The red S button is used for storing Programs and Drawbar presets and also for executing various
TORE
system related operations.
P
ROGRAM BUTTONS
The P buttons 1-8 are used for selecting Programs from the internal memory and also for access-
ROGRAM
ing the different system functions described below.
O S
CTAVE HIFT
The two O
CTAVE
can be used to transpose the notes two octaves up or down (if the selected
instrument supports this). A flashing O
- 2 octaves note shift.
Note: Due to the actual key range of the original Piano instru-
ments, some sounds cannot be octave shifted up and/or down. For organ sounds, the Octave
Shift will only generate notes that are within the 73-key note range of Nord Electro 2 73. This
means that using Octave Shift for Organ sounds in Nord Electro 2 73 won't produce any sound
in the lowest or highest octave.
T S
HE HIFT BUTTON
To the right of the O
kinds of system functions etc.
S
YSTEM FUNCTIONS
To access the system functions, press and hold S
press the corresponding P
you make in the system parameters are automatically
stored in Nord Electro 2, with some exceptions: 'MIDI
Local Off', 'Master Tune', 'Transpose' and 'Output
routing (Hard pan)' are not stored.
S buttons to the bottom left on the front panel
HIFT
CTAVE
S buttons is the S
CTAVE HIFT
button. All changes
ROGRAM
5. Panel reference: System functions
S LED indicates +/
HIFT
button. It's used to access various
HIFT
and
HIFT
Page 33